SECA Core Technology Peer Review Workshop
SECA Core Technology Peer Review Workshop
January 27-28, 2005
Table of Contents
Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.
Papers and Presentations
- Fuel Processing
- Modeling and Simulation
- Power Electronics, Controls & Diagnostics
- Special Topics
- Electrodes
- Seals
- Interconnects
Posters
- Tailoring Fe-Ni Alloys for Intermediate Temperature SOFC Interconnect Application [PDF-1.1MB]
Jiahong Zhu, Tennessee Technological University
- Advanced Net-Shape and Net-Size Insulation for Solid Oxide Fuel Cells [PDF-555KB]
Balakrishnam G. Nair, Ceramatec, Inc.
- Investigation of Novel Alloy TiC-Ni-Ni3Al for SOFC Interconnect Applications [PDF-638KB]
Rasit Koc, Southern Illinois University
- Low-Cost Integrated Composite Seal for SOFC – Materials and Design Methodologies [PDF-1063KB]
Xinyu Huang, University of Connecticut
- Oxidation Resistant, Cr Retaining, Conductive Coatings on Metallic Alloys for SOFC Interconnects [PDF-295KB]
Vladimir Gorokhovsky, Arcomac Surface Engineering, LLC
- Development of Ni-Based Sulfur Resistant Catalyst for Diesel Reforming [PDF-640KB]
Gunther H. Dieckmann, ChevronTexaco
- Composite, High Temperature Seals for Gas Separation Membrane Devices [PDF-4.5MB]
Balakrishnam G. Nair, Ceramatec, Inc.
- High Temperature Seals for Solid Oxide Fuel Cells
Raj N. Singh, University of Cincinnati [PDF-636KB]
- Thermochemically Stable Sealing Materials for Solid Oxide Fuel Cells [PDF-1.8MB]
Richard K. Brow, University of Missouri-Rolla
- Continuous Process for Low-Cost, High-Quality YSZ Powder [PDF-359KB]
Scott Swartz, NexTech Materials, Ltd.
NETL Conference Services Information
National Energy Technology Laboratory
Phone: (412) 386-6044
FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov
NOTE: The abstracts/papers listed below are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 5.0 or newer from Adobe Systems, Inc. to view the Proceedings.