2001 Conference Proceedings

SECA Core Technology Program Workshop

February 14-15, 2001

Table of Contents

Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

Papers and Presentations

  • Welcome
    Dr. Gary McVay, PNNL
  • SECA: Scope and Challenges [PDF-1.5MB]
    Mr. Wayne Surdoval, NETL
  • Workshop Goals and Procedures
    Dr. Gary McVay

Technical Discussions/Topical Areas:

Fuel Processing Technologies
Current status/issues/prioritization; gas/liquid handling, poisons, carbon formation, materials degradation, water sufficiency, system efficiency, etc.

Cell/Stack Materials and Manufacturing Processes
Current status/issues/prioritization;
electrode chemical and structural stability, interface stability, interface modification, low-temperature, operation, process optimization, current collector materials, seals, insulation, redox anode, iR and polarization minimization.

Stack/System Performance and Modeling
Current status/issues/prioritization; electrical, thermal, chemical model, normal and transient operation, internal/direct oxidation model, cell/stack/system model.

Power Electronics
Current status/issues/prioritization, technology gaps, large-scale manufacturing issues, meeting cost targets for Phases 1-3.

  • Lower Cost Power Electronics System Blocks for DG and Automotive Applications
    Mr. Chris Kambouris, Ecostar

Overall Prioritization/Final Adjustments
Gary McVay, Leader; Participants