SECA Coal-Based Systems Email Page
email
Print This Page
print
Performer:  LG Fuel Cell Systems, Inc. Location:  North Canton, Ohio
Project Duration:  10/01/2013 – 03/31/2016 Award Number:  FE0012077
Technology Area:  Solid Oxide Fuel Cells Total Award Value:  $6,415,298
Key Technology:  Systems Development DOE Share:  $5,078,249
Performer Share:  $1,337,049

Stack Block Test Hardware
Stack Block Test Hardware

Project Description

This LG Fuel Cell Systems project comprises laboratory development and testing of solid oxide fuel cell (SOFC) cells and stacks to advance and validate the reliability, robustness, and endurance of LG Fuel Cell Systems' (LGFCS) SOFC technology. LGFCS utilizes its integrated planar segmented-in-series SOFCs at pressures of up to seven atmospheres to achieve higher volumetric power densities. LGFCS will focus on advancing cell and stack materials and designs to create more stable and less expensive SOFC stacks and then test them at various scales to establish a preferred set of materials, which will undergo a block-scale metric test. The "block" test is the representative fuel cell module that forms the building blocks of the LGFCS SOFC power system. The fuel cell stacks will be tested as part of an integrated stack block in which all components needed to produce the flow, temperature, and compositional boundary conditions for the fuel cell stack are used. Consequently, the cells and stacks are evaluated using full-scale balance-of-plant components (reformer, exchanger, off-gas burner, circulators, and ducting) thus validating the performance of a complete integrated block (i.e., stacks and balance-of-plant components).

Project Benefits

This project focuses on development and testing of pressurized cells and stacks to advance and validate performance, reliability, robustness, and endurance. Improved cell/stack life and performance will reduce operating cost and increase efficiency, resulting in reduction in the cost of electricity and reduction of CO2 emissions from the entire platform. Specifically, this project will conduct subscale durability tests of single cells, and 5-cell and bundle test articles, and a metric stack test.

Presentations, Papers, and Publications

Contact Information

Federal Project Manager Patcharin Burke: patcharin.burke@netl.doe.gov
Technology Manager Shailesh Vora: shailesh.vora@netl.doe.gov
Principal Investigator Richard Goetller: richard.goettler@lgfcs.com