The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a system and method for combining polyamines, which immobilizes the dye-absorbing amine sites within low cost, porous silica particles. The innovation has the potential to remove organic-based colorants and pollutants from different water sources. This invention is available for licensing and/or further collaborative research from NETL

Research is active on the application of embedded optical fiber based sensors to an operational solid oxide fuel cell (SOFC) in conjunction with high-temperature stable distributed interrogation approaches to allow for local monitoring of the absolute value and spatial gradient of the chemical composition and temperature of an anode or cathode stream.

Research is active on the design of a spouted bed with a spoutable media to more easily fluidize the fine particles involved in industrial processes by improving mixing and increasing contact area between the fluidizing gas and the particles. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Research is active on the development of metal ferrite oxygen carriers/catalysts for use in processes that convert carbon dioxide (CO₂) to carbon monoxide (CO) or synthesis gas by reforming or gasification. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Challenge

A variety of approaches have been employed to harness CO₂ activation in order to produce useful products for chemical processes and to control greenhouse gas emissions. These approaches include catalytic dry reforming of methane, chemical looping dry reforming of fuel, and coal gasification with CO₂.

CO and synthesis gas are very useful precursors for various chemical processes and can be used as a fuel for energy production. In catalytic dry reforming, the production of syngas from CO₂ and methane is achieved in the presence of a catalyst that offers several advantages, such as mitigation of greenhouse gases emissions and conversion of CO₂ and methane into syngas which can be used to produce valuable downstream chemicals. In chemical looping dry reforming, oxygen from an oxygen carrier or metal oxide is used for partial combustion of methane or coal to produce syngas or CO. The reduced oxygen carrier is then oxidized using CO₂ to produce CO and oxidized oxygen carrier. In coal gasification with CO₂, production of syngas from coal is achieved through the reaction of coal with CO₂ instead of air or steam, which can be enhanced by the presence of metal oxide/metal promoters. Since the gasification process does not require steam, significant cost reductions would be expected. However, finding low-cost and efficient catalysts/oxygen carriers for these processes has been a major challenge, limiting their commercial success.

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a method for achieving tunable gas sensitivity of surface acoustic wave (SAW) devices. The innovation implements a class of materials with tunable absolute film conductivities called conducting metal oxides (CMOs), which enables SAW devices to be calibrated for gas sensitivity in diverse harsh-environment conditions.

Research is active on the design and development of solid oxide fuel cell (SOFC) systems featuring thicker interconnects for increased thermal energy storage. A large amount of heat can then be extracted from the interconnects and used to quickly increase the electric load in a hybrid power system. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory (NETL).

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a system for enhancing chemical reactions by electrostatic/microwave and/or/ radio frequency controlled resonant electron interaction. The invention performs at a much lower temperature than conventional processes. The system can reduce the cost of many important industrial processes including nitrogen and hydrogen production. Although the focus of the invention is on producing hydrogen from hydrocarbon sources, many different reactions could be activated using the same physics. This invention is available for licensing and/or further collaborative research.

Challenge

Approximately 50 percent of natural gas is used by industry. The existing chemical reaction-based processes, such as, the Haber process, are very energy intensive and costly. This invention increases the rate and extent of chemical reactions at much lower temperatures resulting in higher product yield and overall production. It also allows for reduced energy requirements and reactor size of dry and partial oxidation reformers.

A patent-pending computer-control algorithm invented by the National Energy Technology Laboratory enables the manufacture of single-crystal optical fibers of potentially infinite length, with improved diameter control and faster growth, using a laser-heated pedestal growth (LHPG) system. These fibers can be used to fabricate sensors that can withstand the harsh environments of advanced energy systems. This technology is available for licensing and/or further collaborative research from NETL.

Challenge

Single-crystal optical fibers made of sapphire and other materials are only commercially available in short lengths of less than 2 meters. Using conventional technologies, length is limited by the finite size of the feedstock pedestal and equipment constraints that prevent supplying more feedstock material without compromising crystal quality. A robust technological solution is needed that allows replacement of the feedstock pedestal with minimum crystal defects and more consistent diameter for long single-crystal fibers. Other algorithms have been studied, but none has offered the ability to produce fibers of arbitrary length.

Research is active on a method to convert methane into synthesis gas using a mixture of metal oxides. The resulting syngas could be used to manufacture more valuable chemicals. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.