Intensification of Hydrogen Production Enabled by Electrochemical Pumping Module for Purification and CompressionEmail PagePrint Page

Project Information

Prime Performer:Washington University (St. Louis, MO)Agreement Number:FE0032178
Project Duration:10/01/2022 - 09/30/2025Total Award Value:$2,001,311 
Technology Area:Gasification SystemsDOE Share:$1,600,000 
Key Technology:Process Intensification for Syngas & HydrogenPerformer Share:$401,311 
Exploded-view schematic of the electrochemical cell utilized in the EHP, consisting of 1. Back Frame, 2. Current collector, 3. Bipolar plate (BP), 4. Gasket, 5. Gas diffusion layer (GDL), and 6. Proton exchange membrane (PEM)
Exploded-view schematic of the electrochemical cell utilized in the EHP, consisting of 1. Back Frame, 2. Current collector, 3. Bipolar plate (BP), 4. Gasket, 5. Gas diffusion layer (GDL), and 6. Proton exchange membrane (PEM)

Project Description

Washington University in St. Louis, in collaboration with Skyre Inc., will develop and demonstrate an innovative electrochemical hydrogen pump (EHP) technology that will significantly reduce the costs of clean hydrogen production, specifically from small-scale (5–50 MW) biomass gasification units. This cost reduction will be achieved through substantial process intensification by combining two energy-intensive process steps, namely hydrogen purification and compression, into a single step, and by replacing inefficient and scale-driven purification and compression units with a single modular electrochemical purifier/pump. The EHP utilizes a very small amount of electricity, theoretically on the order of 1 kWh/kg hydrogen (H2), to simultaneously treat product gas from a standard water-gas shift reactor and selectively pump pure H2 through an electrochemical cell to achieve high-purity (99.99%) and high-pressure (800 bar) H2 for subsequent storage/utilization or pipeline injection. This results in substantial energy savings as compared to mechanical compression and traditional purification systems. The modular nature of these electrochemical cells enables utilization at similar efficiency at any gasification unit scale. The specific project objectives are to: (1) design, develop, and test critical custom EHP components for specific application to high-purity and high-pressure H2 synthesis from biomass gasifier product gas; (2) demonstrate the optimal operation of a laboratory-scale EHP unit with 82 cm2 cells and up to 10 cells in a stack to produce purified and compressed H2 from a synthetic gasifier product gas, thereby advancing the technology from Technology Readiness Level (TRL) 3 to TRL 4; and (3) perform a techno-economic analysis (TEA) to quantify the potential cost savings associated with EHP implementation and make progress toward the U.S. Department of Energy’s (DOE) Hydrogen Energy Earthshot goal of $1/kg H2.

Project Benefits

Awards resulting from DE-FOA-0002400, “Clean Hydrogen Production, Storage, Transport and Utilization to Enable a Net Zero Carbon Economy,” are targeted toward developing technologies enabling clean hydrogen production, transport, storage, and use in the energy sector, including electricity, heat, transportation, and industrial use. To address the cost disadvantage introduced by modular gasification systems sized in the range of 5-50 MWe and to achieve overall cost reductions in hydrogen production in general, projects selected under Area of Interest (AOI) 1, “Clean Hydrogen Cost Reductions via Process Intensification & Modularization for Hydrogen Shot” apply innovations that leverage process intensification and modularization to streamline capital and operational cost drivers. These awards are focused on achieving overall cost reductions in clean hydrogen production from efficient gasification systems to make progress toward DOE’s Hydrogen Shot initiative’s cost goal of $1 per one kilogram of clean hydrogen. Advances in hydrogen technologies capable of improving performance, reliability, and flexibility of existing and novel methods to produce, transport, store, and use hydrogen will enable carbon footprint reductions associated with energy use, supporting the United States’ goals to reduce greenhouse gas pollution by 2030 and to achieve economy-wide net-zero emissions by 2050.

Contact Information

Federal Project Manager:Diane Revay Madden (diane.madden@netl.doe.gov)
Technology Manager:Jonathan Lekse (jonathan.lekse@netl.doe.gov)
Principal Investigator:Vijay Ramani (ramani@wustl.edu)