Back to Top
Skip to main content
NETL Logo

Available Technologies

Title Date Posted Sort ascending Patent Information Opportunity
Novel Algorithm Enables Manufacture of Continuous Single-Crystal Fibers of Infinite Length USPN 11,352,712

A patent-pending computer-control algorithm invented by the National Energy Technology Laboratory enables the manufacture of single-crystal optical fibers of potentially infinite length, with improved diameter control and faster growth, using a laser-heated pedestal growth (LHPG) system. These fibers can be used to fabricate sensors that can withstand the harsh environments of advanced energy systems. This technology is available for licensing and/or further collaborative research from NETL.

Challenge

Single-crystal optical fibers made of sapphire and other materials are only commercially available in short lengths of less than 2 meters. Using conventional technologies, length is limited by the finite size of the feedstock pedestal and equipment constraints that prevent supplying more feedstock material without compromising crystal quality. A robust technological solution is needed that allows replacement of the feedstock pedestal with minimum crystal defects and more consistent diameter for long single-crystal fibers. Other algorithms have been studied, but none has offered the ability to produce fibers of arbitrary length.

Blended Polymer for Gas Separation Membranes USPN 11,219,857

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a new high performance microporous polymeric blend for carbon dioxide (CO2) gas capture and separation applications. This invention is available for licensing and/or further collaborative research from NETL.

Conducting Metal Oxides Integrated With Surface Acoustic Waves (SAW) Sensors For Use In Harsh Environments USPN 10,976,287

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a method for achieving tunable gas sensitivity of surface acoustic wave (SAW) devices. The innovation implements a class of materials with tunable absolute film conductivities called conducting metal oxides (CMOs), which enables SAW devices to be calibrated for gas sensitivity in diverse harsh-environment conditions.

Hydrophobic Carbon Capture Solvent USPN 10,589,228

Research is active on the design and synthesis of a new carbon dioxide (CO2) capture solvent based on PEG-Siloxane. Unlike conventional gas-removal solvents, the NETL’s new solvent technology is hydrophobic and has a low vapor pressure. A hydrophobic solvent with low vapor pressure is highly advantageous because it can reduce the cost and energy-consumption associated with CO2 capture by simplifying solvent regeneration and negating the need to remove water from fuel gas. For example, this solvent operates above room temperature and can be regenerated using low-grade and waste heat, whereas commercially available solvents operate below room temperature and can’t be regenerated using low-grade or waste heat This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Laser Induced Breakdown Spectroscopy Probe for Simplified Light Collection and Laser Operation USPN 10,145,737

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a laser induced breakdown spectroscopy (LIBS) probe featuring simplified construction that minimizes the need for optical elements from the probes data collection path, reducing potential interference with the transmission of high quality spectra. By reducing the complexity and cost of the laser head, the invention maximizes the amount and quality of light returned for analysis and increases the usefulness of LIBS research.

Stable Immobilized Amine Sorbents for the De-Coloration of Waste Waters USPN 10,836,654

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a system and method for combining polyamines, which immobilizes the dye-absorbing amine sites within low cost, porous silica particles. The innovation has the potential to remove organic-based colorants and pollutants from different water sources. This invention is available for licensing and/or further collaborative research from NETL

High-Temperature Sensors for Monitoring and Control of Solid Oxide Fuel Cells USPN 11,380,918

Research is active on the application of embedded optical fiber based sensors to an operational solid oxide fuel cell (SOFC) in conjunction with high-temperature stable distributed interrogation approaches to allow for local monitoring of the absolute value and spatial gradient of the chemical composition and temperature of an anode or cathode stream.

Polymeric Sorbent for Use in CO2 Capture and Separation USPN 10,323,125

Research is active on the design, synthesis, and use of polymeric sorbents for gas separation applications. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Application of Oxide Dispersion Strengthening Coatings for Improved Transpiration Cooling USPN 9,579,722

Research is active on the development and incorporation of oxide dispersion strengthening (ODS) coatings for use in gas turbine component cooling applications. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Conversion of Carbon Dioxide to Carbon Monoxide or Synthesis Gas by Reforming or Gasification Using Oxygen Carriers/Catalysts USPN 10,864,501; USPN 10,427,138

Research is active on the development of metal ferrite oxygen carriers/catalysts for use in processes that convert carbon dioxide (CO2) to carbon monoxide (CO) or synthesis gas by reforming or gasification. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Challenge

A variety of approaches have been employed to harness CO2 activation in order to produce useful products for chemical processes and to control greenhouse gas emissions. These approaches include catalytic dry reforming of methane, chemical looping dry reforming of fuel, and coal gasification with CO2.

CO and synthesis gas are very useful precursors for various chemical processes and can be used as a fuel for energy production. In catalytic dry reforming, the production of syngas from CO2 and methane is achieved in the presence of a catalyst that offers several advantages, such as mitigation of greenhouse gases emissions and conversion of CO2 and methane into syngas which can be used to produce valuable downstream chemicals. In chemical looping dry reforming, oxygen from an oxygen carrier or metal oxide is used for partial combustion of methane or coal to produce syngas or CO. The reduced oxygen carrier is then oxidized using CO2 to produce CO and oxidized oxygen carrier. In coal gasification with CO2, production of syngas from coal is achieved through the reaction of coal with CO2 instead of air or steam, which can be enhanced by the presence of metal oxide/metal promoters. Since the gasification process does not require steam, significant cost reductions would be expected. However, finding low-cost and efficient catalysts/oxygen carriers for these processes has been a major challenge, limiting their commercial success.