NETL's basic immobilized amine sorbents (BIAS) have previously been shown effective at removing heavy metals and radioactive ions from aqueous sources. Chelating the amines with metals such as iron or copper significantly increases the heavy metal capture affinity of the sorbents, up to 50% over the non-metal chelated amines. In this invention, the metal-chelated polyamine is chemically tethered to a solid silica support (SiO₂) via a crosslinker. The sorbents resist leaching by H₂O in an aqueous stream containing heavy oxyanion-based (and other) metals and demonstrate stability over a pH range of 5 - 14. Cationic heavy metals are captured by the amine functional groups (-NH₂, -NH, -N) from the polymeric network while oxyanionic metal species bind readily to the metal loaded sites. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy's National Energy Technology Laboratory.

Challenge

Heavy metals are common in industrial wastewater streams such as those associated with flue gas desulfurization (FGD), acid mine drainage, hydraulic fracturing, and nuclear fission. As heavy metals pose health and environmental hazards, there is a critical need to remediate them, i.e., safely and efficiently remove them from the aqueous sources. The US Resource Conservation and Recovery Act (RCRA) gave the US Environmental Protection Agency the authority to establish and enforce regulatory policies and toxicity limits arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb), mercury (Hg), selenium (Se), and other metals. Many of these metals present a distinct challenge for capture because they are most commonly present in the polyatomic oxy-anion form. Sources for most of these contaminant metals result from the treatment of fossil fuel-derived, post-combustion flue gas with aqueous-based technologies. The well-known and widespread contamination of RCRA metals in drinking water and other terrestrial water sources either through natural processes or resulting from human activity, demands remediation.

The invention is a new type of amine-based sorbent material that has increased affinity towards heavy metal capture, from a variety of sources that exceeds the existing amine-sorbent ability by greater than 50%. This invention involves use of a polyamine that is chemically tethered to the surface of a solid silica support through use of a crosslinker and further stabilized through hydrogen bonding with a linker/cross linker. These sorbents can be used for the capture of heavy metals from a variety of aqueous sources. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy's National Energy Technology Laboratory.

Challenge

The US Resource Conservation and Recovery Act (RCRA) gave the US Environmental Protection Agency the authority to establish and enforce regulatory policies and toxicity limits regarding Arsenic (As), Cadmium (Cd), Chromium (Cr), Lead (Pb), Mercury (Hg), Selenium (Se), and other metals. Many of these metals present a distinct challenge for capture because they are most commonly present in the polyatomic oxy-anion form. Sources for most of these contaminant metals include flue gas desulfurization (FGD) wastewater streams. These streams result from the treatment of fossil fuel-derived, post combustion flue gas with aqueous-based technologies. The well-known and widespread contamination of metals in drinking water and other terrestrial water sources through natural processes or human activity, demands remediation. In addition, radioactive pollutants in aqueous form have raised concerns about exposure levels in the nearby communities because of fears that these fission products could make their way into the food chain.

Research is active on the patent pending technology titled, “MSE-Based Drilling Optimization Using Neural Network Simulation.” This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

NETL has developed a unique biocatalyst that is robust to environmental challenges and adaptable to feedstock and condition variability.

To combat climate change and move towards a circular carbon economy, technologies are needed to capture, store, and/or convert waste carbon. Microbial gas fermentation is one approach that exploits the natural ability of microorganisms to capture and utilize gaseous waste feedstocks. 

The NETL process uses an enriched microbial biocatalyst to convert carbon into acetate and other short-chain fatty acids. The innovation represents an improved way for direct conversion of carbon dioxide (CO₂) and CO waste gases into value added products with a lower carbon footprint and energy inputs compared to current methods for production of commercial short-chain fatty acids. 

The global acetic acid market is estimated to be $21.5 billion and projected to reach $34.2 billion by 2030.

The invention is available for license and/or CRADA.

Challenge
To combat climate change, slow CO₂ emissions, and move towards a circular carbon economy, technologies are needed to capture, store, and/or convert waste carbon. Microbial gas fermentation is one approach that exploits the natural ability of microorganisms to capture and utilize gaseous one-carbon waste feedstocks.

These technologies are high-performance CO₂ separation membranes made from polyphosphazene polymer blends.  NETL’s technology was originally developed to aid in separating CO₂ from flue gas emitted by fossil-fuel power plants. The NETL membrane is cross-linked chemically using low intensity UV irradiation, a facile technique that improves the membrane’s mechanical toughness compared to its uncrosslinked polyphosphazene constituents. Membranes fabricated with this technique have demonstrated permeability of up to 610 barrer, with CO₂/N₂ selectivity in excess of 30, at a practical separation temperature of 40°C. NETL’s patent-pending technology is being bundled with Idaho National Laboratory’s (INL) patented technology, with NETL handling licensing.  NETL would work with a potential licensee and INL to license the technology. 

Challenge: 
Membrane-based separation is one of the most promising solutions for CO₂ removal from post-combustion flue gases produced in power generation. Technoeconomic analyses show that membranes aimed for this application must possess high gas permeability; however, most high permeability materials suffer from poor mechanical properties or unacceptable loss in performance over time due to physical aging. This technology is a successful attempt to turn one of these high-performance materials with poor mechanical properties into one amenable for use in practical separation membranes with virtually no physical aging issues.
 

This invention describes the synthesis and application of nanostructured copper (Cu) catalysts that selectively convert carbon dioxide (CO₂) into carbon monoxide (CO). This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Challenge
The electrochemical CO₂ reduction reaction (CO₂RR) is an appealing strategy for addressing man-made CO₂ emissions because it can leverage excess renewable energy to produce carbon-neutral chemicals and fuels. However, the economic viability of large-scale CO₂RR systems will depend on the ability to selectively and efficiently form desirable products. Because it is earth-abundant and can produce a variety of products, Cu is a popular CO₂RR catalyst. Unfortunately, the wide product distribution of Cu introduces inefficiencies in the form of chemical separation steps.

This invention describes basic immobilized amine sorbents (BIAS) with improved pelletization process and formulation for use in CO₂ capture processes. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Challenge
BIAS sorbents demonstrate high CO₂ capture capacity and thermal stability over multiple steam regeneration cycles and represent a promising approach for CO₂ removal from a variety of source points, including coal and natural gas combustion power plants. Bench- and pilot-scale testing have demonstrated the feasibility of commercial-scale BIAS sorbents. However, full commercialization of BIAS sorbents requires pelletization. Commercially available silica typically serves as the support for amine-based particle sorbents, yet these materials are not commercially feasible due to their relatively low mechanical strength and difficult management in dynamic reactor systems. Thus, the development of an economical method of fabricating a strong silica-supported BIAS pellet is a primary concern.

Research is active on a method to convert methane into synthesis gas using mixed metal oxides. The resulting syngas could be used to manufacture more valuable chemicals. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Challenge

Natural gas (NG), which is composed primarily of methane, is one of the most abundant, low-cost carbon-containing feedstocks available. The economically available route to produce valuable chemicals from methane is via synthesis gas followed by different chemical routes to manufacture the desired chemicals. In a large-scale industrial plant, the production of syngas accounts for a large part of the total costs. Therefore, it is important to develop more efficient and cost-effective methods for the conversion of methane to syngas.

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a laser induced breakdown spectroscopy (LIBS) probe featuring simplified construction that minimizes the need for optical elements from the probes data collection path, reducing potential interference with the transmission of high quality spectra. By reducing the complexity and cost of the laser head, the invention maximizes the amount and quality of light returned for analysis and increases the usefulness of LIBS research.

Research is currently active on the patented technology titled, "Kick Detection at the Bit Using Wellbore Geophysics." This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.