|Development of an Advanced Simulator to Model Mobility Control and Geomechanics During CO2 Floods||Last Reviewed 6/21/2013|
The goal of this project is to develop an advanced reservoir simulation and visualization tool for compositional flow and transport coupled with geomechanical deformation in porous media, with advanced mobility control methods such as foam, to better model and predict oil production during carbon dioxide (CO2) flooding and improve predictions of oil production from residual oil zones.
The University of Texas at Austin, Austin, Texas 78713-7726
Carbon dioxide enhanced oit recovery (CO2-EOR) has exhibited strong growth in the past 30 years and has expanded despite extreme crude oil price fluctuations. However, there are several issues challenging the oil recovery, economic efficiency, and applicability of the process.
Predictive simulation may be the only means to develop optimal strategies in the absence of complete characterization of the reservoir geology. It is critical to develop robust, scalable, and mechanistic numerical modeling tools because of the multiple scales of the various interacting processes in the reservoir, the basin scale of the reservoir, the need for long time predictions, and the potential for significant coupling between geomechanics and flow.
This project will develop an advanced CO2-EOR simulator with visualization capability, coupled with an advanced phase behavior and foam mobility control module, coupled with geomechanical deformation in porous media, and an advanced grid for complex reservoirs. The project will also include support for the modeling of complex coupled fluid flow and transport processes, geomechanical deformation, 3- phase flash, a mechanistic foam model, and a comprehensive relative permeability model that includes the effects of composition, interfacial tension, and hysteresis. The simulator will be used to accurately predict changes in the reservoir system during injection of viscous CO2 and aid in the design and optimization of new generation CO2 injection projects with permanent CO2 storage in mind. The research will result in a computational framework and modules with advanced numerical algorithms and underlying technology for research in CO2 applications, which will be validated against published results and benchmarked against other simulators. The project will support the education and training of an interdisciplinary work force.
Development of a new, computationally efficient, high-performance reservoir simulator with visualization capability for new generation CO2-EOR and CO2 storage will help maximize oil production after waterflooding and from residual oil zones. Success of this proposed project may help to build stakeholder confidence in the effectiveness of this advanced technology as well as result in optimal recovery strategies to produce a significant portion of the remaining domestic oil resources.
Accomplishments (most recent listed last)
Current Status (June 2013)
The team is testing and validating recently implemented features in the new simulator DOE-CO2-v1. Both empirical and semi-empirical foam models are being tested using published experimental data. The first foam model is based on two simultaneous mechanisms affecting mobility of gas in the presence of foam, namely, the reduction of the gas relative permeability because of gas trapping, and the increase in gas apparent viscosity due to the resistance of movement of lamellae. The second foam model follows the local-equilibrium approximation method to the population balance modeling where the foam texture is approximated by placing foam-generation and coalescence rates in equilibrium. This foam-texture approximation increases the applicability of population balance models in the full-field three-dimensional studies. The aim is to validate the models and gain some confidence in their prediction capability.
A modified version of Jerauld?s three-phase general hysteresis relative permeability model has been incorporated into the new simulator for further testing. This model is applicable to mixed-wet reservoirs and approaches the correct two- and three- phase flow when one phase appears or disappears due to mass transfer with other phase(s). The trapping behavior of oil and gas phases is capillary number dependent and scaled proportional to the capillary number of the trapped phase, i.e., oil and/or gas. The curvatures of the gas and oil relative permeabilities are also scaled according to the capillary desaturation curve. Preliminary simulations have been performed to test Jerauld?s model, specifically, hysteretic behavior, the impact on oil recovery, and CO2 breakthrough times for different mobility control methods such as Water-Alternating-Gas (WAG).
The following tasks will be performed during the next six months of the project:
Project Start: February 1, 2011
Project End: December 31, 2013
DOE Contribution: $799,558
Performer Contribution: $199,884
NETL ? Sinisha (Jay) Jikich (email@example.com or 304-285-4320)
The University of Texas at Austin ? Mojdeh Delshad (firstname.lastname@example.org or 512-4711-3219)
If you are unable to reach the above personnel, please contact the content manager.