Technology Transfer
Available Technologies for Partnership
At NETL, we believe that teaming together through partnerships will help to solve our nation's energy problems while giving the U.S. a competitive edge in global competition. The below technology portfolio contains a broad range of innovations that have resulted from NETL's research in areas such as carbon capture and sequestration, mercury capture, fuel cells, sensors and controls, computational modeling, and materials science, among many others.
All of the innovations listed are available for licensing and some are available for further research and development. Please contact our Technology Transfer Group at techtransfer@netl.doe.gov for information on how to start partnership discussions.
Notifications of new posted partnership opportunity notices are immediately added to our RSS feed and our Twitter account.
Month Posted |
Partnership Opportunity |
Patent Information |
| 2/2012 |
Method for the Production of Mineral Wool and Iron from Serpentine Ore |
8,033,140 |
| 2/2012 |
Poly (Hydroxyl Urethane) Adhesives and Binders from CO2-Based Intermediates |
U.S. Patent
Pending |
| 01/2012 |
Arc Position Sensing |
U.S. Patent
Pending |
| 01/2012 |
Semi-Continuous Detection of Mercury in Gases |
8,069,703 |
| 01/2012 |
Thief Carbon Catalyst for Oxidation of Mercury in Effluent Stream |
8,071,500 |
| 12/2011 |
Method for Regeneration of Immobilized Amine Sorbents for Use in CO2 Capture (the BIAS Process) |
U.S. Patent
Pending |
| 12/2011 |
Carbonaceous Chemistry for Computational Modeling |
U.S. Patent
Pending |
| 12/2011 |
Method for the Photocatalytic Conversion of Gas Hydrates |
6,267,849 |
| 12/2011 |
Real-Time Raman Gas Composition Analyzer |
U.S. Patent
Pending |
| 12/2011 |
Regenerable Immobilized Aminosilane Sorbents for Carbon Dioxide Capture |
U.S. Patent
Pending |
| 11/2011 |
Carbon Dioxide Capture Process with Regenerable Sorbents |
6,387,337 |
| 10/2011 |
Method to Remove Ammonia Using a Proton-Conducting Ceramic Membrane |
6,630,116 |
| 09/2011 |
Planar Solid Oxide Fuel Cell with Staged Indirect-Internal Air and Fuel Preheating and Reformation |
6,635,375 |
| 09/2011 |
Gas Sampling System for a Mass Spectrometer |
6,670,608 |
| 09/2011 |
Device and Method for Separating Minerals, Carbon and Cement Additives from Fly Ash |
6,681,938 |
| 09/2011 |
Lean Blowoff Detection Sensor |
7,197,880 |
| 08/2011 |
Optimum Catalyst Size Selection for Slurry Bubble Column Reactors |
7,619,011 |
| 08/2011 |
Low Temperature Sorbents for Removal of Sulfur Compounds from Fluid Feed Streams |
6,743,405 |
| 06/2011 |
High Capacity Immobilized Amine Sorbents |
7,288,136 |
| 06/2011 |
Rapid Gas Hydrate Formation Process |
U.S. Patent
Pending |
| 06/2011 |
Process for Sequestering Carbon Dioxide and Sulfur Dioxide |
7,604,787 |
| 06/2011 |
Multi-component Removal in Flue Gas by Aqua Ammonia |
7,255,842 |
| 08/2011 |
Amine Enriched Solid Sorbents for Carbon Dioxide Capture |
6,547,854 |
| 05/2011 |
Solid sorbents for removal of carbon dioxide from gas streams at low temperatures |
6,908,497 |
| 05/2011 |
Ultrasound Analysis of Slurries |
6,959,589 |
| 04/2011 |
Method for Sequestering Carbon Dioxide and Sulfur Dioxide
Utilizing a Plurality of Waste Streams |
7,922,792 |
| 03/2011 |
Method for Producing Components with Internal Architectures, Such as Micro-Channel Reactors, via Diffusion Bonding Sheets |
7,900,811 |
| 03/2011 |
CO2 Separation from Low-Temperature Flue Gases |
7,842,126 |
| 03/2011 |
Thermal Barrier Coatings |
7,740,948 |
| 03/2011 |
Method of Detecting Leakage from Geologic Formations Used to Sequester CO2 |
7,704,746 |
| 02/2011 |
Regenerable Hydrogen Chloride and Hydrogen Sulfide
Removal Sorbents for High Temperature Gas Streams |
7,767,000 |
| 02/2011 |
Capacitance Probe for Detection of Anomalies in Nonmetallic Plastic Pipe |
7,839,282 |
| 12/2010 |
High Speed Particle Image Velocimetry |
U.S. Patent
Pending |
| 10/2010 |
Catalysts for Oxidation of Mercury in Flue Gas |
7,776,780 |
| 10/2010 |
Thief Process for the Removal of Mercury from Flue Gas |
6,512,021 |
| 10/2010 |
Method for Removal of Mercury from Various Gas Streams |
6,576,092 |
| 08/2010 |
Fail Save Shut Off Valve for Filtering Systems Employing Candle Filters |
6,981,516 |
| 08/2010 |
Energy Recovery During Expansion of Compressed Gas Using Power Plant Low-Quality Heat Sources |
7,007,474 |
| 08/2010 |
Regenerable Sorbents for CO2 Capture from Moderate and High Temperature Gas Streams |
7,314,847 |
| 08/2010 |
Laser Spark Distribution and Ignition System |
7,421,166 |
| 08/2010 |
Mercury Sorbent Delivery System for Flue Gas |
7,494,632 |
| 08/2010 |
Ionization Based Multi-directional Flow Sensor |
7,523,673 |
| 08/2010 |
Method of Applying a Cerium Diffusion Coating to a Metallic Alloy |
7,553,517 |
| 08/2010 |
Real-Time Combustion Control and Diagnostics Sensor-Pressure Oscillation Monitor |
7,559,234 |
| 08/2010 |
Piezoelectric Axial Flow Microvalve |
7,159,841 |
| 08/2010 |
Direct Fired Reciprocating Engine and Bottoming High Temperature Fuel Cell Hybrid |
6,994,930 |
| 7,619,011 |
Design of slurry bubble column reactors: novel technique for optimum catalyst size selection contractual origin of the invention |
|
|
| 6,793,910 |
Process to Accomplish Autothermal or Steam Reforming Via a Reciprocating Compression Device |
|
|
| 6,672,725 |
Transpiration purged optical probe |
|
|
| 6,672,502 |
Method for Making Devices Having Intermetallic Structures and Intermetallic Devices Made Thereby |
|
|
| 6,630,116 |
Method to Remove Ammonia Using a Proton-Conducting Ceramic Membrane |
|
|
| 6,623,880 |
Fuel Cell-Fuel Cell Hybrid System |
|
|
| 6,468,499 |
Method of generating hydrogen by catalytic decomposition of water |
|
|
| 6,425,504 |
One-Piece, Composite Crucible With Integral Withdrawal/Discharge Section |
|
|
| 6,056,796 |
Rigid Porous Filter |
|
| 6,056,125 |
Cross Flow Cyclonic Flotation Column for Coal and Minerals Beneficiation |
|
| 6,033,794 |
Multi-Stage Fuel Cell System Method and Apparatus |
|
| 5,948,722 |
Method for Producing Iron-Based Catalysts |
|
| 5,798,088 |
Method for Producing Elemental Sulfur from Sulfur-Containing Gasses |
|
| 5,387,275 |
Process for Removing Copper in a Recoverable Form From Solid Scrap Metal |
|
| 5,167,676 |
Apparatus and Method for Removing Particulate Deposits from High Temperature Filters |
| |
|
| ARCHIVED PATENTS |
| |
For more information regarding technology transfer opportunities, contact Jessica Sosenko, Technology Transfer Analyst at jessica.sosenko@netl.doe.gov or 412.386.7417
|
ABOUT NETL
E&P Technologies
