Joining of Advanced High-Temperature Materials Email Page
email
Print This Page
print
Performer: 
PNNL - Pacific Northwest National Laboratory
TEM image of the Friction Stir Welded nugget in<br/>Eurofer 97 – exhibits little difference from the base metal
TEM image of the Friction Stir Welded nugget in
Eurofer 97 – exhibits little difference from the base metal
Website:  PNNL - Pacific Northwest National Laboratory
Award Number:  FWP-12461
Project Duration:  10/01/1996 – 09/30/2014
Total Award Value:  $8,315,000.00
DOE Share:  $8,315,000.00
Performer Share:  $0.00
Technology Area:  Plant Optimization Technologies
Key Technology:  High Performance Materials
Location:  Richland, Washington

Project Description

The objective of this project is to develop the joining technology required for high-efficiency, low-emissions fossil energy conversion in support of U.S. Department of Energy Office of Fossil Energy clean coal programs. Focus will be on oxide dispersion strengthed alloys and nickel based superalloys.

Project Benefits

This project will demonstrate joining of advanced high-temperature materials. Development of effective joining methods to maintain the material performance of high-performance alloys will enable their use in high-temperature, high-pressure, corrosive environments, including advanced ultrasupercritical steam turbines and boilers. Improvement to high-temperature advanced materials will promote the development of advanced power plant designs that can operate at higher temperatures and pressures, with improved efficiency and operational flexibility, resulting in lower capital and operating costs.

Contact Information

Federal Project Manager 
Vito Cedro: vito.cedro@netl.doe.gov
Technology Manager 
Scott Smouse: scott.smouse@netl.doe.gov
Principal Investigator 
Glenn Grant: glenn.grant@pnl.gov

 

Click to view Presentations, Papers, and Publications