Waste Heat Integration with Solvent Process for More Efficient CO2 Removal from Coal-Fired Flue Gas Email Page
email
Print This Page
print
Performer: Southern Company Services, Inc
Outline of HES Heat Extractor
Outline of HES Heat Extractor
Website: Southern Company Services, Inc
Award Number: FE0007525
Project Duration: 10/01/2011 – 05/31/2016
Total Award Value: $15,589,925.00
DOE Share: $12,066,602.00
Performer Share: $3,523,323.00
Technology Area: Post-Combustion Capture
Key Technology: Solvents
Location: Birmingham, AL

Project Description

Southern Company Services, Mitsubishi Heavy Industries America (MHIA), and URS Group have teamed to develop viable heat integration methods for the capture of carbon dioxide (CO2) produced from pulverized coal combustion plants, improving upon the current state-of-the-art for solvent-based capture processes. An advanced level of heat integration between the power plant and the CO2 capture facility will be investigated by incorporating a waste heat recovery technology into an existing amine-based CO2 capture process. The project will incorporate MHIA’s High Efficiency System (HES) heat recovery and integration technology into an existing 25 megawatt electrical (MWe) pilot plant demonstration of the Kansai Mitsubishi Carbon Dioxide Recovery (KM-CDR™) CO2 capture process at Southern Company’s Plant Barry. The HES heat integration technology will use waste heat streams to provide needed process stream heating, reducing the amount of low pressure (LP) steam extracted for the solvent regeneration system. The recovered heat will also be used to heat boiler feed water, further reducing the extraction steam demands on the LP turbine and increasing the LP steam available for power generation. The HES has been successfully demonstrated at several low-sulfur, coal-fired power plants outside of the United States, though not with CO2 capture. This project will examine the HES performance with high-sulfur flue gas, and as integrated with a CO2 recovery system. A preliminary techno-economic analysis has indicated that HES with advanced heat integration can reduce the total energy impact of a CO2 capture system by 26 percent, a significant step toward meeting the Department of Energy’s goal for the cost of electricity.

Project Benefits

This project is focused on improving energy performance by integrating a flue gas waste heat recovery technology into a pilot amine-based CO2 capture process at a host pulverized coal power plant. The HES provides efficient use of traditionally wasted heat in coal-fired flue gas and captured CO2 for process stream heating and boiler feed-water pre-heating, resulting in improved overall power plant performance and reduced capital and operating costs. The HES technology also has the potential for enhanced removal of sulfur trioxide and trace metals from the flue gas as a result of improved electrostatic precipitator performance. This improvement has the added benefits of reducing amine solvent loss and accumulation of metals, thereby reducing operating costs of the solvent capture process. Specifically, this project will demonstrate HES system integration with a 25 MWe KM-CDR pilot process at Southern Company’s Plant Barry.

Contact Information

Federal Project Manager Bruce Lani: bruce.lani@netl.doe.gov
Technology Manager Lynn Brickett: lynn.brickett@netl.doe.gov
Principal Investigator Nick Irvin: jairvin@southernco.com

 

Click to view Presentations, Papers, and Publications