Project No: FE0001580
Performer: University of Miami


Contacts
Traci Rodosta
Carbon Storage Technology Manager
National Energy Technology Laboratory
3610 Collins Ferry Road
PO Box 880
Morgantown, WV 26507
304-285-1345
traci.rodosta@netl.doe.gov

Karen Kluger
Project Manager
National Energy Technology Laboratory
626 Cochrans Mill Road
P.O. Box 10940
Pittsburgh, PA 15236-0940
412-386-6667
karen.kluger@netl.doe.gov

Peter Swart
Principal Investigator
Rosenstiel School of Marine and 
Atmospheric Science
University of Miami
4600 Rickenbacker Causeway
Miami, FL 33149-1098
305-421-4103
pswart@rsmas.miami.edu
Timothy H. Dixon
Co-Principal Investigator
University of South Florida
4202 E. Fowler Avenue
Tampa, FL 33620
813-974-0152
thd@usf.edu

Duration
Award Date:  10/01/2009
Project Date:  09/30/2014

Cost
DOE Share: $1,958,748.00
Performer Share: $489,011.00
Total Award Value: $2,447,759.00

Performer website: University of Miami - http://www.rsmas.miami.edu

Carbon Storage - Monitoring, Verification, Accounting, and Assessment

Combining Space Geodesy, Seismology, and Geochemistry for Monitoring, Verification and Accounting of CO2 in Sequestration Sites

Project Description

This four-year project — performed by faculty and researchers from the University of Miami’s Rosenstiel School of Marine and Atmospheric Science and the University of South Florida, assisted by UNAVCO, Inc., a non-profit consortium funded by the National Science Foundation — aims to develop an integrated, low-cost methodology for assessing the fate of CO2 injected into various classes of geologic reservoirs. The project team will integrate data from space geodesy (which utilizes highprecision Global Positioning System [GPS] and Interfero-metric Synthetic Aperture Radar [InSAR] technology to measure subtle surface displacements), seismology, and geochemistry in a straightforward series of procedures and algorithms, and assess the cost and efficacy of these procedures for long-term tracking of CO2. This new approach will be tested at a large-scale CO2 injection test site. Results are expected to confirm suitability of this methodology for most carbon storage sites.


Program Background and Project Benefits

Through its core research and development program administered by the National Energy Technology Laboratory (NETL), the U.S. Department of Energy (DOE) emphasizes monitoring, verification, and accounting (MVA), as well as computer simulation and risk assessment, of possible carbon dioxide (CO2) leakage at CO2 geologic storage sites. MVA efforts focus on the development and deployment of technologies that can provide an accurate accounting of stored CO2, with a high level of confidence that the CO2 will remain stored underground permanently. Effective application of these MVA technologies will ensure the safety of geologic storage projects with respect to both human health and the environment, and can provide the basis for establishing carbon credit trading markets for geologically storing CO2. Computer simulation can be used to estimate CO2 plume and pressure movement within the storage formation as well as aid in determining safe operational parameters; results from computer simulations can be used to refine  and update a given site’s MVA plan. Risk assessment research focuses on identifying and quantifying potential risks to humans and the environment associated with geologic storage of CO2, and helping to ensure that these risks remain low.

It will be necessary to improve existing monitoring technologies, develop novel systems, and protocols to satisfy regulations to track the fate of subsurface CO2 and quantify any emissions from reservoirs. The Carbon Storage Program is sponsoring the development of technologies and protocols by 2020 that are broadly applicable in different geologic storage classes and have sufficient accuracy to account for greater than 99 percent of all injected CO2. If necessary, the tools will support project developers to help quantify emissions from carbon capture, utilization, and storage (CCUS) projects in the unlikely event that CO2 migrates out of the injection zone. Finally, coupled with our increased understanding of these systems and reservoir models, MVA tools will help in the development of one of DOE’s goals to quantify storage capacity within ± 30 percent accuracy.

Assessment of the efficiency, safety, and long-term fate of CO2 injected into various types of geologic storage reservoirs remains a challenge. If successfully proven, the integrated methodology for CO2 monitoring in a storage reservoir described above can be implemented at relatively low cost at most proposed carbon storage sites. It will require only the installation of a sparse network of GPS, seismic, and geochemical stations, and low-cost commercial satellite imagery.

Primary Project Goal

The primary objective of the DOE’s Carbon Storage Program is to develop technologies to safely and permanently store CO2 and reduce Greenhouse Gas (GHG) emissions without adversely affecting energy use or hindering economic growth. The Programmatic goals of Carbon Storage research are: (1) estimating CO2 storage capacity in geologic formations; (2) demonstrating that 99 percent of injected CO2 remains in the injection zone(s); (3) improving efficiency of storage operations; and (4) developing Best Practices Manuals (BPMs).

The primary objective of this project is to develop and test a new, integrated approach for MVA of CO2 that is stored in deep geologic formations. This objective will help to improve and demonstrate the need for efficient storage operations and further demonstrate CO2 storage permanence in the subsurface. The essence of this approach is to integrate reconnaissance-scale space techniques with ground-monitoring methods of seismic and geochemical techniques, including:


Accomplishments