Nano Engineered Catalyst Supported on Ceramic Hollow Fibers for the Utilization of CO2 in Dry Reforming to Produce Syngas Email Page
email
Print This Page
print
Performer: Institute of Gas Technology Inc. (IGT)
Image of nano-engineered catalyst inset<br/>shows size distribution of nanoparticles<br>Source: Applied Catalysis B: Environmental,<br/>Volume 201, February 2017, Pages 302-309
Image of nano-engineered catalyst inset
shows size distribution of nanoparticles
Source: Applied Catalysis B: Environmental,
Volume 201, February 2017, Pages 302-309
Website: Gas Technology Institute
Award Number: FE0029760
Project Duration: 07/01/2017 – 06/30/2020
Total Award Value: $999,797
DOE Share: $799,807
Performer Share: $199,990
Technology Area: Carbon Use and Reuse
Key Technology: Chemical Conversion
Location: Des Plaines, Illinois

Project Description

Gas Technology Institute (GTI) has teamed with Missouri University of Science and Technology to develop a novel catalytic reactor that utilizes carbon dioxide (CO2) from coal-fired power plants in the dry reforming of methane (CO2 + CH4 → 2 H2 + 2 CO) to produce synthesis gas, the building block for a large market of valuable products and chemicals. The catalytic reactor will contain nano-engineered catalyst, deposited on high packing-density hollow fibers. This work builds on the team’s promising nano-engineered catalyst that shows much higher catalytic activity and better stability than conventional catalysts in dry reforming for production of syngas. Researchers will develop and optimize the catalyst, deposit it on hollow fibers, and design and construct a catalytic reactor. Performance testing will be done for two reactor configurations, (packed bed mode and pressure-driven transport mode). Additionally, a technical and economic feasibility study and a life cycle analysis will be completed.

Project Benefits

This novel catalytic technology, that utilizes CO2 captured from coal-fired power plants, has the potential to enable an economic process for the dry reforming of methane to produce syngas—the building block for a large market of valuable products and chemicals.

Contact Information

Federal Project Manager Bruce Lani: bruce.lani@netl.doe.gov
Technology Manager Lynn Brickett: lynn.brickett@netl.doe.gov
Principal Investigator Dr. Shiguang Li: shiguang.li@gastechnology.org

 

Click to view Presentations, Papers, and Publications