Turbines Projects Summary Table by State
Agreement Number Project Title Performer Name
California
FE0011929 Abradable Sealing Materials for Emerging IGCC-Based Turbine System University of California, Irvine
FE0023983
Rotating Detonation Combustion for Gas Turbines-Modeling and System Synthesis
Aerojet Rocketdyne
SC0015111
Ceramic-Metal Joining of Components Used at High-Temperature and High Pressure
Physical Optics Corporation
SC0015179
Nanoscale Metal Oxide Coatings for Corrosion Protection of Superalloy Materials
Calabazas Creek Research, Inc.
SC0015181
Corrosion and Erosion Resistant Surface Features for High Pressure Supercritical Carbon Dioxide Heat Exchangers
Altex Technologies Corporation
Colorado
SC0015941
A Suite of Ultra High-Temperature Ceramic Components for Advanced Turbine Systems Based on Polymer-Derived Ceramics
Sporian Microsystems Inc.
Connecticut
FE0024011 Combined Cycle Power Generation Employing Pressure Gain Combustion United Technologies
Florida
FE0023955
Ceramic Matrix Composite Advanced Transition for 65% Combined Cycle
Siemens Energy
FE0025260
Chemical Kinetic Modeling Development and Validation Experiments for Direct Fired Supercritical CO2 Combustor
University of Central Florida
SC0008218 Air-Riding Seal Technology for Advanced Gas Turbine Engines Florida Turbine Technologies Inc.
Georgia
FE0011722 Microstructure Sensitive Crystal Viscoplasticity for Ni-Base Superalloys Georgia Tech Research Corporation
FE0025174
Investigation of Autoignition and Combustion Stability of High Pressure Supercritical Carbon Dioxide Oxy-Combustion
Georgia Tech Research Corporation
FE0025344
High Temperature Low Nox Combustor Concept Development
Georgia Tech Research Corporation
SC0015101
Ceramic-Metal Joining by a Novel Flame Processing
NGimat Company
Illinois
FE0023998
Advanced Turbomachinery Components for Supercritical CO2 Power Cycles
Gas Technology Institute
SC0009592 Computational Materials Design of Castable SX Ni-based Superalloys for IGT Blade Components QuesTek Innovations LLC
SC0013220
Exploration of High Entropy Alloys for Turbine Applications
QuesTek Innovations LLC
Indiana
FE0011796 New Mechanistic Models of Creep-Fatigue Interactions for Gas Turbine Components Purdue University
FE0011822 Effects of Exhaust Gas Recirculation (EGR) on Turbulent Combustion and Emissions in Advanced Gas Turbine Combustors with High-Hydrogen-Content (HHC) Fuels Purdue University
Iowa
FWP-AL05205018 Analysis of Gas Turbine Thermal Performance Ames National Laboratory
Massachusetts
SC0015144
Ceramic to Metal Joints Physical Sciences Inc.
Michigan
FE0025315
A Joint Experimental/Computational Study of Non-Idealities in Practical Rotating Detonation Engines
Regents of the University of Michigan
New Jersey
SC0013691
An Advanced Gas Foil Bearing Using Supercritical Carbon Dioxide as the Working Fluid Mechanical Solutions, Inc.
New York
FE0023965 Advanced Multi-Tube Mixer Combustion for 65% Efficiency General Electric Company
FE0024006
High Temperature CMC Nozzles for 65% Efficiency
General Electric Company
FE0024007 Development of Low-Leakage Shaft End Seals for Utility-Scale SCO2 Turbo Expanders General Electric Company
North Dakota
FE0011875 Thermally Effective and Efficient Cooling Technologies for Advanced Gas Turbines University of North Dakota
Ohio
FE0025320 Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering Ohio State University
SC0004356 High Temperature Unique Low Thermal Conductivity Thermal Barrier Coating (TBC) Architectures UES Inc.
SC0011335 Durable High Temperature Coatings for Utility Scale Gas Turbine Hot Gas Path Components UES, Inc.
Oregon
FWP-2012.03.02
Turbine Thermal Management NETL - National Energy Technology Laboratory
Pennsylvania
FE0025011
Improving Turbine Efficiencies Through Heat Transfer and Aerodynamic Research in the Steady Thermal Aero Research Turbine (START) Pennsylvania State University
FE0025495
Understanding Transient Combustion Phenomena in Low-NOx Gas Turbines Pennsylvania State University
FE0025793 Design, Fabrication and Performance Characterization of Near-Surface Embedded Cooling Channels (NSECC) with an Oxide Dispersion Strengthened (ODS) Coating Layer University of Pittsburgh
FWP-2012.03.02 Turbine Thermal Management NETL - National Energy Technology Laboratory
South Carolina
FE0012005 An Experimental and Modeling Study of NOx-CO Formation in High Hydrogen Content Fuels Combustion in Gas Turbine Applications University of South Carolina
FE0023965 Advanced Multi-Tube Mixer Combustion for 65% Efficiency General Electric Company
FE0024006 High Temperature CMC Nozzles for 65% Efficiency General Electric Company
FE0024007 Development of Low-Leakage Shaft End Seals for Utility-Scale SCO2 Turbo Expanders General Electric Company
Tennessee
FWP-FEAA123 Advanced Materials Issues in Supercritical Carbon Dioxide
ORNL - Oak Ridge National Laboratory
Texas
FE0011778 High-Pressure Turbulent Flame Speeds and Chemical Kinetics of Syngas Blends with and without Impurities Texas Engineering Experiment Station
FE0012053 Predictive Large Eddy Simulation Modeling and Validation of Turbulent Flames and Flashback in Hydrogen Enriched Gas Turbines University of Texas at Austin
FE0024041 High Inlet Temperature Combustor for Direct Fired Supercritical Oxy-Combustion Southwest Research Institute
SC0015743 Superalloy MMC Components for Advanced Turbine Systems Advanced Powder Solutions Inc.
Utah
SC0007544 Ultra-High Temperature Thermal Barrier Coatings HiFunda, LLC
SC0015118 Novel Materials for Metal to Ceramic Transitions HiFunda, LLC
Vermont
SC0015951 Improving Efficiency and Reducing Costs for the Supercritical CO2 Design Process Concepts NREC, LLC
Virginia
FE0011762 Evaluation of Flow and Heat Transfer Inside Lean Pre-Mixed Combustor Systems Under Reacting Flow Conditions Virginia Polytechnic Institute and State University
SC0010175 Rapid Manufacturing Method for High-Temperature Turbine Components Mikro Systems Inc.
SC0013098 Advanced Bond Coats for Thermal Barrier Coating Systems Based on High Entropy Alloys Directed Vapor Technologies International Inc.
SC0015192 Ceramic-to-Metal Joining for High Temperature, High Pressure Heat Exchangers Electron Technologies, Inc.
West Virginia
FWP-2012.03.02 Turbine Thermal Management NETL - National Energy Technology Laboratory

 

Go to Project Portfolio Home
Go to List of Projects and Performers
Go to Projects Location Map