Pilot Testing of a Highly Effective Pre-Combustion Sorbent-Based Carbon Capture System
Project No.: DE-FE0013105

TDA is developing a new sorbent-based pre-combustion carbon capture technology for integrated gasification combined cycle (IGCC) power plants. The process, which was evaluated at bench-scale under a previous effort, uses an advanced physical adsorbent that selectively removes CO2 from coal derived synthesis gas (syngas) above the dew point of the gas. The sorbent consists of a mesoporous carbon grafted with surface functional groups that remove CO2 via an acid-base interaction. The reactor design will be optimized by using computational fluid dynamics and adsorption modeling to improve the pressure swing adsorption cycle sequence. The research will include: two 0.1 MWe tests with a fully-equipped prototype unit using actual synthesis gas to prove the viability of the new technology; long-term sorbent life evaluation in a bench-scale setup of 20,000 cycles; the fabrication of a pilot-scale testing unit that will contain eight sorbent reactors; and the design of a CO2 purification sub-system. The CO2 removal technology will significantly improve (3 to 4 percent) the IGCC process efficiency needed for economically viable production of power from coal.

Pilot-Scale Testing Unit
Pilot-Scale Testing Unit


Related Papers and Publications:


  • For further information on this project, contact the NETL Project Manager, Elaine Everitt.

Get Social With Us: