fem

23rd Annual Conference on Fossil Energy Materials 
May 12-14, 2009

Table of Contents

PRESENTATIONS

  • Introduction and Opening Remarks 
    Robert Romanosky
    , National Energy Technology Laboratory

Session 1 - Advanced Alloys & Concepts

  • Computational Design and Experimental Verification of Refractory Metal-Based Alloys
    Omer Dogan, National Energy Technology Laboratory
  • Materials and Component Development for Advanced Turbine Systems – ODS Alloy Development
    Bruce Kang, West Virginia University
  • Improving the Performance of Creep Strength-Enhanced Ferritic Steels
    Mike Santella, Oak Ridge National Laboratory
  • Development of Alumina-Forming Austenitic Stainless Steels
    Yukinori Yamamoto, Oak Ridge National Laboratory
  • Advanced Processing of Metallic Powders for Fossil Energy Applications
    Iver Anderson, Ames Laboratory
  • Computational and Experimental Development of Novel High Temperature Alloys
    Matthew Kramer, Ames Laboratory and Iowa State University
  • Improving the Weldability of Fe-Cr-Al Alloys Through TiC Additions
    John Dupont, Lehigh University

Session 2 - Corrosion & Protection of Materials

  • Development of Fireside Corrosion Models for Advanced Combustion Systems
    Steven Kung, The Babcock & Wilcox PGG
  • Development of NDE Methods for Ceramic Coatings and Membranes
    Jiangang Sun, Argonne National Laboratory
  • Computational Modeling and Assessment of Nanocoatings for USC Boilers
    David Gandy, Electric Power Research Institute (EPRI)
  • Performance of Al-Rich Oxidation Resistant Coatings for Fe-Base Alloys
    Bruce Pint, Oak Ridge National Laboratory
  • Oxidation in Environments with Elevated CO2 Levels
    Gordon Holcomb, National Energy Technology Laboratory
  • Microstructure, Processing, Performance Relationships for High Temperature Coatings
    Thomas Lillo, Idaho National Laboratory

Session 3A - Corrosion & Protection of Materials (Continued)

  • Performance of Structural Alloys in CO2 and CO2-Steam Environments
    Ken Natesan, Argonne National Laboratory
  • Development and Evaluation of Nanostructured Coatings for Coal-Fired Environments
    Madhavrao Govindaraju, SAI Global Technologies, Inc.

Session 3B - Functional Materials

  • Joining Technologies for Coal Power Applications
    Scott Weil, Pacific Northwest National Laboratory
  • Improved Temperature Sensing in Slagging Gasifiers
    James Bennett, National Energy Technology Laboratory
  • Cast Versions of Wrought Alloys: Candidates for Steam Turbine Casings
    Paul D. Jablonski, National Energy Technology Laboratory

Session 4 - US-UK MOU Materials Program Phase 1

  • Overview of the US-UK Collaboration on Fossil Energy Materials
    John Oakey, Cranfield University
  • Overview of the US-UK Collaboration on Fossil Energy Materials: Steam Oxidation
    Ian Wright, Oak Ridge National Laboratory
  • US-UK Boiler Corrosion/Corrosion Monitoring
    Barry McGhee, Doosan Babcock Energy Limited
  • Gas Turbines Fired on Syngas and Other Fuel Gases
    Anand Kulkarni, Siemens Energy, Inc.
  • ODS Alloy Development: US-UK Phase-1 Report
    Bimal Kad, University of California, San Diego
    Gordon Tatlock, University of Liverpool
  • Standarisation in High-Temperature Corrosion Testing
    Tony Fry, National Physical Laboratory
  • Closing Remarks
    Robert Romanosky, National Energy Technology Laboratory

NETL Conference Services Information 
National Energy Technology Laboratory 
Phone: (412) 386-6044 FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov


Disclaimer 
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 7.0 or newer from Adobe Systems, Inc. to view the Proceedings.

StayConnected Facebook Twitter LinkedIn RssFeed YouTube